Ultimaker S5 Pro Bundle

Description

Scale up your ambition. The large build volume of the Ultimaker S5 not only lets you print bigger models – it allows you to put multiple parts on a single build plate. Meet demand, maximise efficiency, and enjoy better air quality and 24/7 productivity by combining the Ultimaker S5 with its Air Manager and Material Station.

See the main features below:

• Enhanced Reliability: Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.
• Bigger Build Volume: A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches) gives even more freedom to realize your designs or print multiple parts in one go, so you can meet demand with maximum efficiency, while fitting comfortably on your desk.
• Fast Setup, High Uptime: With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.
• Easy Touch Control: A 4.7-inch (11.9 cm) touch display makes operating the 3D printer effortless, displaying visual guides to explain configuration changes and maintenance, plus a visual preview of your print.
• Designed to Connect: The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.
• Stay Connected, Stay Productive: The Ultimaker app lets your monitor and control Ultimaker 3D printers from a mobile device and can even keep you updated with live notifications outside your local network.
• Comes with two rolls of filament; 1x Ultimaker Tough PLA (750g) – Color may vary, 1x Ultimaker PVA (750g)

Air Manager

The Ultimaker S5 Air Manager provides a closed, inside-out airflow throughout the printing process. This leads to a better-controlled environment inside the build chamber and filters up to 95% of ultrafine particles created while printing. The result? A safer work environment and peace of mind when printing with a wider range of materials with an Ultimaker S5.

In short, these are the main features:

• EPA filter: Removes up to 95% of UFPs
• Controlled extraction: Inside-out airflow optimized for filtering and print quality
• Enhanced safety: Physical barrier prevents reaching inside the printer
• Optimized for your application: Detects material being used and adjusts airflow
• Easy setup: Printer detects when Air Manager is connected
• Smart monitoring: Printer tracks filter usage and prompts replacement

Material Station

Seamlessly integrating with the Ultimaker S5, the Material Station redefines filament storage and delivery, unlocking truly 24/7 dual extrusion. Inside the humidity-controlled chamber, six material spools can be loaded in any order with up to 4.5 kg of material. Each bay features automatic material switching, composite-ready feeder wheels, and filament flow sensors. Now you can achieve increased productivity, easier operation, and higher-quality production.

The main features are listed here:

• Fast and easy loading: Front-facing bay for up to six materials reduces loading time to a few seconds
• Uninterrupted printing: Sensors detect when one material spool ends and automatically loads the next
• Humidity control: Intelligent atmospheric management keeps relative humidity below 40%
• Easy setup and monitoring: NFC material auto-recognition and seamless integration with Ultimaker software
• Composite materials compatible: Print parts with high strength and unique properties
• Limitless configurations: Keep your most-used materials ready to print when you need – Ultimaker and third-party filaments

Industrial production power on your desktop

Our unique production solution gives busy engineers and designers the freedom to focus all day on doing their best work. Transform your office 3D printing workflow with automated material handling, air filtration, and filament humidity control. The Ultimaker S5 Pro Bundle boosts productivity, flexibility, and confidence to unlock demanding applications with an extended range of materials.

Auto-switching materials for 24/7 production

The Ultimaker S5 Material Station has been tested again and again to ensure its custom-designed filament prefeeders switch without fail. Load up to six materials and let the seamless material switching take over. It really is the end of those end-of-spool worries.

Material handling without the headaches

The Ultimaker S5 Material Station reduces the risk of human error in material handling and storage. Its bays secure each filament spool so it can’t jump off. Ejected filament always retracts with a clean, sharp tip. And moisture-sensitive filament can be safely left in the humidity-controlled chamber.

Workhorse performance to depend on

Round-the-clock production for demanding applications requires a 3D printer you can rely on to deliver quality parts, right on time. Enclosed on all sides, optimized settings per material, with humidity controlled material storage – the Ultimaker S5 Pro Bundle puts industrial production power on your desktop

r S5 Material Station reduces the risk of human error in material handling and storage. Its bays secure each filament spool so it can’t jump off. Ejected filament always retracts with a clean, sharp tip. And moisture-sensitive filament can be safely left in the humidity-controlled chamber.

Easy end-to-end management

The Ultimaker S5 Pro Bundle comes with one more powerful component you can’t see – free, intuitive Ultimaker software. Ultimaker Cura manages fan settings for each material so you don’t have to. Ultimaker Connect queues print jobs to unlock 24/7 production power. And the Ultimaker Marketplace allows easy use of third-party filaments, for widest range of engineering 3D printing materials.

Out of the box setup. Out of this world productivity

The Ultimaker S5 Pro Bundle is easy to set up – simply connect the devices and you’re ready to start printing. Like all our products, it’s designed to be so easy to use that anyone can feel confident to start printing after a 30-minute introduction. So there’s no need for a dedicated operator or specialized training.

No fume hoods, No Dry Boxes, No worries

When printing with Ultimaker materials, the Ultimaker S5 Air Manager removes the need to install costly external ventilation, so you can print in more workplace locations. The Ultimaker S5 Material Station cuts out the need for DIY dry boxes and filament dryers. Simply store your spools where it makes most sense – under your printer.

Dimensions

Build Volume:

330 x 240 x 300 mm

(13 x 9.4 x 11.8 inches)

Assembled Dimensions:

495 x 500 x 1197 mm

(19.5 x 19.5 x 47.1 inches)

Print Technology:

Fused filament fabrication (FFF)

Weight :

41.9 kg (92.4 lbs)

Power Input:

100-240 VAC, 50-60 Hz

Maximum Power Output:

600W

Printer Properties

Layer Resolution:

0.25 mm nozzle: 150 – 60 micron

0.4 mm nozzle: 200 – 20 micron

0.6 mm nozzle: 300 – 20 micron

0.8 mm nozzle: 600 – 20 micron

XYZ Resolution

6.9, 6.9, 2.5 micron

Feeder Type

Dual-geared feeder, reinforced for composite materials

Display

4.7-inch (11.9 cm) color touchscreen

Print Core Replacement

Swappable print cores

Print Head

Dual extrusion print head with an auto-nozzle lifting system and swappable print cores

Nozzle Diameters

0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm

Operation Parameters

Filter Technology

Replaceable EPA filter

Air Extraction Rate

1 – 50 m³/h (35 m³/h nominal rate for most materials at 23 °C)

Filter Efficiency

Up to 95%

Material Capacity

6 spools

Compatible Filter Diameter

2.85 mm

Compatible Spools

Width: 50 – 70 mm (2 – 2.7 in)

Diameter: 197 – 203 mm  (7.8 – 8 in)

Core diameter: > 98 mm (3.8 in)

Operating Sound

< 51 dBA

Operating Ambient Conditions

15 – 30 °C (59 – 86 °F), up to 70% relative humidity

Non-Operating Temperatures

0 – 32 °C (32 – 90 °F)

3D Printer Operating Parameters

 

 

Ecosystem

Supplied Free Software

Ultimaker Cura  – print preparation software

Ultimaker Digital Factory – printer management software

Supported OS

MacOS, Windows, and Linux

Plugin Integration

SolidWorks, Siemens NX, Autodesk Inventor

Supported File Types

Ultimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG

Printable formats: G, GCODE, GCODE.gz, UFP

File Transfer 

Wi-Fi, Ethernet, USB